When the matter is about the headlights of the car, you need to take special care on choosing and using them. The headlamps are actually the basic components of the car. From keeping you safe during the night time drive to helping you reduce your chances to fall asleep while driving at night. You just need to choose the best headlight for your car and properly install them for the use.
Headlights, if not properly installed, can be very dangerous because the whole kit can just meet a shot circuit and stop working instantly. Let us help you know the process of installing a LED headlight kit in your car.
LED lights are the latest market trend currently and everyone wants one! They have a number of advantages to serve you as the headlight bulbs for your car. They are:
- LEDs come in reasonable costs
- They serve for longer periods of time than the normal halogen counterparts
- They can work for lifetime minimizing replacement
- They have brighter colors
- They ensure better visibility of the road and the road signs during the night
- They are easy to install
- LEDs can be customized
In this article, you will get a clear guideline on how you can change over your old headlight kit with the new one. If you are changing your halogen lights with the LEDs for the headlight, a step by step procedure explanation is given below.
Step 1: Select the Correct Kit
It is very important for you to select the right LED kit which is compatible with your car. You may have a prominent chance of ordering the wrong kit if you have not studied your car. There are generally two kinds of LED kits available which are used for car headlights. They are single beam and dual beam. The single beam acts either as a high beam or a low beam light. If you choose this kind of a light, your headlamp panel should have two lights.
For a dual beam light, the LEDs can perform both the roles of high beam and a low beam. You should select a kind of conversion kit according to your need. You should also be aware of the type of the bulb which would be the best for your car.
Step 2: Preparations to take for installation
There are certain preparations which you need to take for installing the LED bulbs. The kit generally contains two bulbs and basalts, wirings and terminated connectors are also provided.
You need to give the ballasts with total security. You can either use zip ties to do this job or self-tapping screws can also be used.
Make sure you park your car at a place where there is a complete safety. You need to properly mark the headlight beam.
Step 3: Removal of Headlight Bulbs
Make sure you execute this process with utmost care. You need to pull out the old headlights and replace the new ones. You should always be careful with the car parts. At the back of the headlight bulb, there should be a wiring connection which you have to remove. The removal of the old bulb will then follow.
Move it counterclockwise to remove. In the case of the presence of the metal base, you should always refrain from twisting. Unhook the connector wire instead. The headlight will easily slide out the housing.
Step 4: Installing the LED kit
This process is majorly the reverse of the previous process. Only the new LED kit will go in place. You should always consider wearing protection while handling than new lights. Cotton gloves can serve the best for this. If you are installing a custom headlight you should be more careful. The process may be different than replacing the regular LEDs. You need to connect and secure the couple of ballasts. Properly connect every needful wire to the circuit. You can seek professional support whenever you need. Remember to secure the ballasts as it is done.
Step 5: Enjoy your new Led Blubs
You can enjoy your new LED after the installation is complete. Always try to test the beams and alignments minutely before finalizing. Remember that headlight is one of the main car accessories to deal with.
So, now that you have a clear idea about the installation of the headlights, you can confidently go ahead and install the headlights!